Sunfire Cinema Grand 200-seven User Manual Download Page 7

User's Manual

7

Front Panel Features

Overview

Your Cinema Grand Ampli

Þ

 er

 

has 

seven chan nels of power ampli

Þ

 ca-

tion combined in one chassis for the 
purpose of re pro duc ing music or video 
soundtracks. It accepts line level 
signals from a controlling preampli

Þ

 er 

and ampli

Þ

 es them to a higher level, 

suitable for driving powerful stereo 
and Home Theater speak ers. 

Meter

The front panel meter indicates the 

total energy available from the track-
ing downconverter power supply. It is 
cal i brat ed in Joules and will normally 
indicate ap prox i mate ly 480 Joules 
for the Signature 400~seven, and 
400 Joules for the 200~seven. Note 
that the needle does not move under 
normal use.

Crystal Base

The glass base is intended to en-

sure proper air

ß

 ow under the ampli-

Þ

 er. It prevents any carpeting from 

restricting the air

ß

 ow.

If you choose to place the unit on a 

shelf or other hard surface, the base 
will isolate the amp from vibration and 
will help make an at trac tive installa-
tion.

Illumination

The meter is illuminated by an 

in can des cent lamp operating at a 
very warm color tem per a ture. I have 
been in

ß

 uenced by the scale lighting 

of classic electronic equipment from 
the 1950’s, with their warm dim glow, 
usually with a “headlight effect” from 
the lamp. I incorporated that historical 
look and feel into this meter lighting. It 
is decidedly 

not

 “evenly back-lit,” nor 

with a cool to cold color temperature. I 
hope you like my unusual meter light-
ing treatment.

A switch has been provided on the 

un der side of the unit toward the front. 
This switch gives you the ability to 
dim the meter lamp to reduce distrac-
tions in a Home Theater environment. 
I like the brighter of the two settings, 
as it il lu mi nates the meter nicely and 
matches my other Sun

Þ

 re equipment. 

Feel free to choose the setting that 
suits you.

CHAPTER 1

0

100

200

300

400

500

JOULES

Power Supply Energy

Load Invariant High Fidelity Super Definition Power Amplifier

Sunfire

Cinema Grand

Four Hundred Watts per Channel by Seven Channels

Signature 400 ~ seven

Summary of Contents for Cinema Grand 200-seven





















Reviews: