User's Manual
34
CHAPTER 4
INPUTS P2
TUNER
TUNER PRESETS
TAPE
PHONO
8-CHANNEL
8-CH INPUT CONFIGURE
NAME
8-CHANNEL
GAIN TRIM
0 dB
LOCK TO VID
VID1
MAIN ZONE
ENABLE
TRIGGER RELAY
ON
MAIN MENU
TRIMS
MODES
TONE
INPUTS
SETTINGS
Input Menus
These menus let you select which
input you would like to con
Þ
gure.
Pressing the joystick right on each
input brings up a second menu which
allows you to con
Þ
gure what happens
when each input is selected.
Input Menus
INPUTS
DVD
CD
SAT
VID1
VID2
VCR
Input Con
Þ
guration Menus
The illustration shows a typical menu,
for con
Þ
guring the DVD input.
Name
Use the joystick up/down, and
left/right to change the display
name for any input, up to 9
characters.
Gain Trim
Use this to adjust all of your
sources to play at similar levels.
To prevent overloading, the
levels can only be adjusted
downwards. You should try
and trim all the inputs to be the
same average level as your
quietest source.
Default Mode
Set the input to a favorite sur-
round mode or stereo.
Main
Zone
Enable/disable the selected
input in the Main Zone. You can
set up your system so any un-
used inputs are not selectable.
From the factory, the inputs
are enabled. If you choose to
disable an input, then it will not
play in the Main Zone.
Full
Auto
This turns on/off the full-auto
mode for this input. When on,
the Receiver will turn on and
select this input whenever this
input starts to play. You can de-
select any input which hinders
full-auto operation.
Trigger Relay
The Trigger Relay can be set to
turn on whenever the input is
selected. This could be used to
turn on an ampli
Þ
er or a video
screen for example.
Zone 2
Enable/disable the input in
Zone 2. You can select the
inputs you wish to play in Zone
2. For example, you might dis-
able the Phono input if nobody
in Zone 2 appreciates your
vintage collection of 78s.
Note: the 8-Channel input menu is
slightly different from the other menus:
It allows you to select a
speci
Þ
c video input whenever
the 8-Channel audio input is
selected. Also, this input only
works in the Main Zone, not
Zone 2.
DVD INPUT CONFIGURE
NAME
DVD
GAIN TRIM
0 dB
DEFAULT MODE
LAST
MAIN ZONE
ENABLE
FULL AUTO
ON
TRIGGER RELAY
ON
ZONE 2
ENABLE
