SUNERGY USA WORKS LLC
2
1. APPLICATIONS
SUNERGY Solar PV modules are a highly reliable, virtually maintenance-free direct current (DC)
power source, designed to operate most efficiently in sunlight. SUNERGY series modules are ideal
to power remote homes, recreational vehicles, water pumps, telecommunications systems and
many other applications either with or without the use of storage batteries. Class A, Modules rated
for use in this application class may be used in systems operating at greater than 50V DC or 240W,
where general contact access is anticipated. Modules qualified for safety through this part of IEC
61730-1 and IEC 61730-2 and within this application class are considered to meet the
requirements for safety class II.
Notes:
The recommended maximum series/parallel module configurations are as follow:
72 6 " mono series: 16/1 60 6 " mono series: 20/1
54 6 " mono series: 21/1 36 6 " mono series: 32/1
72 6 " poly series: 17/1 60 6 " mono poly: 20/1
54 6 " poly series: 23/1 36 6 " mono poly: 34/1
2. PERMIT
Before installing your system, contact local authorities to determine the necessary permit,
installation and inspection requirements.
3. CLIMATE CONDITION
Install the SUNERGY Solar crystalline series modules in the following conditions:
Ambient temperature: -20°C to + 40°C
Operating temperature: -40°C to +85°C
Storage temperature: -40°C to +40°C
Humidity: below 85RH%
Wind pressure: below 50.12Ib / ft
2
(2400Pa)
Corrosion resistance: Except for corrosive salt area and sulfurous area.
4. WARNING AND NOTES FOR SAFE INSTALLATION WORK
This system shall be installed only by engineers who have completed the training course.
Each solar panel has a junction box, can provide cable according to customer’s requirement.
