Bi-Spectrum Radiometric Detector
User Manual
Visible-light Parameter Configuration
Issue V1.0 (2019-10-08)
61
Parameter
Meaning
Configuration Method
TRANSI.(N
->D)(dB)
It determines the night-to-day switching
in auto mode. When the system gain is
smaller than the value of this parameter,
the system enters the day mode.
This parameter is valid in auto mode.
The value of
TRANSI.(D->N)
must be
greater than the value of
TRANSI.(N-
>D)
.
[Setting method]
Drag the slider.
[Default value]
30
Delay(s)
The delay time of day to night or night
to day.
This parameter is valid in auto mode.
[Setting method]
Drag the slider.
[Default value]
0
DTN Time
Time of day to night.
[Setting method]
Select a value from the
drop-down list.
[Default value]
18:00
NTD Time
Time of night to day.
[Setting method]
Select a value from the
drop-down list.
[Default value]
6:00
6.2.7 Noise Reduction
Figure 6-8 shows the Noise Reduction interface.
