Bi-Spectrum Radiometric Detector
User Manual
Quick Configuration
38
Issue V1.0 (2019-10-08)
Figure 4-14
Schedule Linkage
Step 2
Tick the output channel.
Step 3
Enable “Alarm Record”, “SMTP”,”FTP” button.
Step 4
Set schedule linkage.
Method 1
：
Click
left mouse button to select any time point within 0:00-24:00 from
Monday to Sunday as shown in Figure 4-14.
Method 2
：
Hold down the left mouse button, drag and release mouse to select the
alarm time within 0:00-24:00 from Sunday to Saturday.
NOTE
When you select time by dragging the cursor, the cursor cannot be moved out of the
time area. Otherwise, no time can be selected.
Method 3
：
Click
in the alarm time page to select the whole day or whole week.
Deleting alarm time:
Click
again or inverse selection to delete the selected alarm
time.
Step 5
Click
Apply
.
The message "Apply success" is displayed, the system saves the settings.
----End
4.6.5 Thermal Mapping
Step 1
Choose
Configuration
>
Thermal Mapping,
as shown in Figure 4-15.
