Dual Vision Light Load Thermal PTZ
User Manual
Visible-light Parameter Configuration
55
Issue V1.0 (2019-04-03)
Table 6-1describes the parameters on the Image Adjust tab page.
Table 6-1
Parameters on the Image Adjust tab page
Parameter
Description
Configuration
Method
Contrast
It indicates the contrast between the bright part
and the dark part of an image.
As the value increases, the contrast increases.
[Setting method]
Drag the slider.
[Default value]
50
Brightness
It indicates the total brightness of an image. As
the value increases, the image becomes
brighter.
[Setting method]
Drag the slider.
[Default value]
50
Sharpness
It indicates the border sharpness of an image.
As the value increases, the borders become
clearer, and the number of noise points
increases.
[Setting method]
Drag the slider.
[Default value]
50
Saturation
It indicates the color saturation of an image. As
the value increases, the image becomes more
colorful.
[Setting method]
Drag the slider.
[Default value]
50
----End
6.2.3 Scene Mode
Figure 6-4 shows the scene mode interface.
