© 2015 SunEdison
13
1
Refer to design package and module label for specific Fire Performance Type.
6.0 Disclaimer of Liability
The information in this manual is based on SunEdison’s
knowledge and experience and is believed to be accurate.
However, the information in this manual (without
exception) including recommendations and specifications
does not constitute a warranty, expressed or implied.
SunEdison reserves the right to change the manual, the
module, or specifications without prior notice.
The product warranty will be voided if:
• Handling and installation does not conform to
SunEdison’s written installation instructions.
• The product has been modified in a manner not
previously authorized by SunEdison in writing.
• The product is installed in an environment for which it
was not designed.
• There may be other conditions that could void the
warranty. Please check the applicable product warranty.
SunEdison will not be held liable for special, indirect,
consequential, contingent or incidental damages related
to or arising from the installation or use of the product by
purchaser under any circumstances.
SunEdison assumes no responsibility for any product
application or use that is beyond SunEdison’s direct
control. SunEdison does not accept responsibility
and expressly disclaims liability for loss, damage, or
expense arising out of or in any way connected to such
installation, operation or maintenance of the product.
International Product Certifications:
Certification
• IEC 61215 certified by TÜV SÜD
• IEC 61730 certified by TÜV SÜD
to ensure electrical safety
• UL 1703 listed by CSA for US
and Canada
Environmental
AB8 (−50 C to +40 C)
Module Fire
Performance
Type 1 or Type 2 available
1
Fire Resistance
Rating
Class C
IEC 61215, IEC 61730, CE, UL 1703 and Safety Class II
certifications ensure that SunEdison solar products operate
safely and comply with applicable national and global
electrical, performance, reliability and fire safety codes.
SunEdison modules are certified by:
