3
Installation
Before mounting and power up, it is necessary to verify protec-
tive earthing and cable connections.
Technical maintenance
Maintenance the device, search and troubleshooting should be
performed by service personnel. The device should be free from
dirt, dents, connecting cables and wires must be intact and securely
fastened.
1.
Ensure the device has no damage due to transportation.
2.
Install the unit onto the truss or surface. Connect the power
cable plug to a power outlet PowerCON.
3.
For single-channel mode connect cable to input port «IN» (IN
A or IN B). If the input signal is present, the appropriate port indica-
tor is green. If there is no signal, the indicator is red.
4.
For dual-channel mode connect two cables to input ports
«IN» (IN A and IN B). If the input signal is present, the appropriate
port indicator is green. If there is no signal, the indicator is red.
5.
Connect the desired number of output lines to the connectors
«OUT».
6.
The device is ready for use.
