16
6.3
HOW TO ADJUST THE SPREADING VANES
In order to assure an homogenous distribution on both sides of the centrifugal spreader, depending on the
different specific weight of the used SALT, the distributor vanes on the disc can have different
positions.
When all the vanes are placed in position 1 (as shown in the picture), the distribution of the product
is increased towards left, compared to the way of the tractor moving. On the contrary, if the vanes are put in
hole 4, the distribution will be bigger towards right.
Moreover, moving the vanes from position 1 to position 4, at the same speed, there will be an increase of the
distributing width of SALT distribution.
DISTRIBUTOR VANE ADJUSTMENT
6.4
SPREAD PATTERN
The SALT spreading is regulated through the regulation lever that moves the opening section on the bottom
of the hopper.
In order to carry out the regulation, after having consulted the spreading table, according to the type of
product to spread and to the spreader speed, it is necessary to move the lever “A” along the graduated scale
“E” and blocking it in the chosen position with the pin “D”. See the further table.
