GROUND
+12V Power
Connect the +12V terminal of the amplifier to the terminal of the battery using the same diameter
as the ground cable, making sure you install in-line fuse holder, approximately 300 or 400 mm.
From the terminal of battery, making sure that there is no fuse in the battery holder
GROUND
Disconnect the battery and connect the GND (ground) terminal to the cars chassis.
Keep this cable as short as possible (not longer than 20 inches or less).
Making sure that the connection with the chassis is rust free and clear of paint or grime.
REMOTE
Connect the REM terminal of the amplifier to the power antenna terminal in the car ignition switch
using 12 or 16 ga. electrical wire.
Caution
This amplifier is not supplied with internal fuse
in itself. Make sure you install in-line fuse holder
from the terminal of battery.
Recommend 650 Ampere fuse.
POWER CONNECTIONS
HEAD UNIT
BATTERY
GROUND
