Email: [email protected]
Facebook: #5sundayliving
8
（
3
）
1
、
Using the 45mm screws and wall plugs supplied fit the Upper Brackets,as illustrated above.
2
、
Hook the heater into position.
3
、
If the heater is wall mounted it must be at least 1000mm(39.4inch) off the ceiling to provide enough air
intake. If the heater is wall mounted it must be at least 1000mm(39.4inch) off the floor to avoid overheat at
the ceiling.
TABLETOP INSTALLATION
(Preparation: Two stand feet and Two 4*25 screws).
Fix the standing leg on the products by using the two 4*25mm screws, as shown in the figure above.
Warning:
If you choose freestanding use, you don
’
t
need to fix the wall hanging holder on the wall.
screws
screws
