background image

8.10  Fragrance Dispenser

On the rim of your hot tub is a screw-off cap labeled “SunScents Fragrance
Dispenser” (Figure-F, Page 14). It is designed to contain packages of a specially
made fragrance available from your Sundance dealer. The fragrance is carried
into the hot tub water by the air coming through the injector system when the 
air blower is on.  

WARNING

To prevent personal injury, always turn off air 

blower before removing or installing SunScents dispenser cap.

CAUTION: 

Use Only Sundance SunScents

TM

Fragrances in your

new hot tub.  Never remove the SunScents

TM

beads from their

plastic cage for any reason.  Install bead cage directly into
SunScents

TM

dispenser.  Never use this dispenser for any other

type of fragrance. Always make certain that the dispenser cap is
securely in place before operating the hot tub’s air blower.

8.11  Optional SunSound

TM

Audio System

Sundance models with the optional audio system offer
enhanced spa enjoyment by offering an integrated state-of-the-
art audio system.  These models include a high-quality
AM/FM/CD splash-resistant marine stereo receiver, two high-
quality marine speakers, and an integrated subwoofer for long-life and an
excellent sound quality.  Two speakers located on spa corners (Figure-F,
page 13) are designed for manual exposure and retraction.  To expose each
speaker for audio playback, simply press download on each enclosure to
unlatch it’s “pop-up” mechanism, then release.  To retract each speaker
before covering spa, gently press downward on each enclosure until you feel
a slight “click”, then release.

CAUTION:

Never step or sit on a speaker enclosure!  This type 

of misuse will damage the speaker enclosure latching and 
track mechanism.  Always retract speakers prior to covering spa.

Page 16

ENGLISH

Summary of Contents for 850Export Series


















































Reviews: