Signature Outdoor Television
Quick Start Guide SB-S-XX-4K
Planning the Location
Place the Signature in a partially shaded area
Sources/What to Watch
• Signals can be sent from any source using
an HDMI, Component, Ethernet, or digital
antenna connection.
• Refer to the operator’s manual for detailed
instructions
Weather Proofing
1
2
ON
HDMI 1: ARC/MHL
HDMI 2: MHL
Rear IR
Receiver
12V DC
Analog Audio
Out
Service Port
5V DC 3.5A Max
Aux Power
1.3mm ID x
3.8mm OD
VGA
IR Flasher
HDBaseT
VGA Stereo
Input
S-Video
ATSC/
NTSC Tuner
Digital
Audio Out
AV1/Video
IR RCVR PWR
Off/On
RS-232
Input
Speaker
Out
Component 1-2: Video In
• The Signature is equipped with an
HDBaseT receiver in the media bay
• After all connections are made, all wires
must exit the media bay from the bottom.
• Up to 5 wires can exit the media bay while
still maintaining the weatherproof feature.
Note:
Leave a drip loop as the wires enter the
compartment.
• Tighten the thumb screws completely to
weatherproof the TV.
Wires
Drip Loop
Media Bay
Thumb Screws
