page | 5
© 2017 SunBrite™
The table below outlines which standoff should be used with which SunBriteTV models.
NOTE:
43 inch model SunBriteTVs do not require standoffs for installation.
Model Name
Model Number
Standoff Size
Veranda
6574
7/8” Standoff
Signature
5584
None
Signature
6584
1/2” Standoff
Pro
4917
None
Pro
5518
None
CONNECTING AND CALIBRATING
Proper connections are important to the performance of any speaker within an
audio system.
Performing the following steps will ensure proper connections for optimum
speaker performance:
1.
At each speaker connection, ensure that the outer jacket is separated by at
least 2 inches.
2.
Strip t
he insulation on each conductor approximately ¼” and insert into the
speaker terminals.
• Ensure that there are no stray strands of wire protruding from the connectors.
• Observe proper polarity (+ to + and – to – ) for each speaker and at the
amplifier).
3.
Turn on the home theater receiver and calibrate all speakers in the system
according to the receiver (or surround processor) manufacturer’s instructions.
Connecting to a SunBriteTV
Connect the sound bar to Signature and Pro Model SunBriteTVs using the included
5 pin male connector wire (DIN Cable). Connect the wire ends as shown in the
diagram below.
L–
R–
L+
R+
Red Wire (L+)
Black Wire
(L
–
)
White Wire (R+)
Yellow Wire (R
–
)
