background image

Page 28

Adjusting On-Screen Displays – Setup Menu

1. Press 

qp

 buttons on the remote or CH+/CH- on the TV) to move the cursor to the item to be selected.

2. Press 

t

 

u

 buttons on the remote or VOL+/VOL- on the TV to make the desired adjustments.

3. When your adjustments are complete, press MENU or EXIT on the remote or MENU on the TV to exit the main menu.

Menu Language

Press the 

qp

 buttons to highlight Menu Language, then use 

t

 

u

 to select English, French or Spanish.

 

Transparent

Press the 

qp

 buttons to highlight Transparent, then use        

t

 

u

 to select to what degree the picture shows through the 

on-screen menus: 0%, 25%, 50%, 75% or 100%. At 0%, none of 

the underlying picture will show through the menus.

Restore Default

Press the 

qp

 buttons to highlight Restore Default, then use        

t

 

u

 to bring up the Restore Default submenu.  Press 

t

 to 

restore the TV to factory settings, press 

u

 to cancel.

Closed Caption

This option appears only when TV is selected as the source. 
Press the 

qp

 buttons to highlight Closed Caption, then use 

t

 

u

 to enter the CC Mode submenu shown at left. Pressing 

t

 

u

 will now select among the three closed caption modes: Off, 

On and CC on Mute. The last option shows captions only when 
mute is activated.

Advanced Selection Services

When the CC Mode submenu is on-screen, press the 

qp

 

buttons to highlight Advanced Selection Services. Use 

t

 

u

 to 

select Advanced Selection Services Off or 1-6. Availablility of 
these services depends on the TV program.

Options

When the CC Mode submenu is on-screen, press the 

qp

 

buttons to highlight Options. This option is available only 
when one of the Advanced Selection Services is selected. Use 
the 

 

button to enter the Options submenu shown at left.

Now  the 

t

 

u

 will allow you to select Default or Custom 

mode for the captions. In Custom Mode, you can use the 

qp

 

buttons to select different options, such as font style and size, 
font color and background color, then use 

t

 

u

 to adjust these 

options.

Summary of Contents for SB-3270HD











































Reviews: