SunBriteTV 4660HD, Owner'S Manual

Page: 9 / 44

SunBriteTV Model 4660HD Operator’s Manual
Page 9
TV Installation – Rear Panel Connections
1. UsB : This port is used for factory firmware upgrades.
2. HDmi (4): HDMI connects to devices that use HDMI cable, such as Blue-ray or HD DVD player, or HD cable/satellite set-top box. This
connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device
for video.
3. Vga: This connection port connects to a PC for video using VGA cable. Be sure to connect your audio cable to the VGA Stereo input if you
want sound out of VGA video source.
4. Vga stereo input: This connection port is for people who want to provide audio to the TV when using a PC or DVI video device. The sources
use 3.5 mini-jack audio cable.
5. Component 1 (yPbPr1)
- This connection port is for DVD players or satellite/cable set-top boxes that use component cables. From left to
right, connect green, blue and red for video, and then connect white for left channel audio and red for right channel audio.
6. Component 2 (yPbPr2) - This connection port is for DVD players or satellite/cable set-top boxes that use component cables. From left to
right, connect green, blue and red for video, and then connect white for left channel audio and red for right channel audio.
7. audio Out-TOslink:
This connection port is used for sending out digital audio signals to digital surround sound receivers. The black
connector cover needs to be pulled out and the port sends out either bit-stream or PCM digital sound signal to a home theater receiver with
digital input.
8. analog audio Out: This connection is used for connecting a headphone or amplifier to the TV
9. nTsC/aTsC (TV):
This connection is for digital or analog cable without the cable box or over-the-airwave antennas. The tuner is a hybrid
tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable. For over the airwave digital stations please check
http://www.antennaweb.org.
10. ir Window: The Internal Infrared (IR) Control Window allows the TV to be controlled from a remote system using IR commands. ( To install
IR Emitter, see Page 42. )
11. speaker:
This connection is to be used with SunBriteTV Model 4660HD speaker module only.
12. aV1 (CVBs or s-Video): Connects to devices that use composite or s-video cables such as VCR or camcorder or video game consoles.
Connect the video portion with either the yellow connector or the S-Video connector. Do NOT connect both video connectors. Use the
SOURCE button to select AV1 (CVBS) on your MAIN SOURCE if you are using the yellow plug for video, use the SOURCE button to select AV1
(S-Video) on your MAIN Source if you are using the S-Video connector to view this connection.
1 3 5 7 9 11
2 4 6 8 10 12