SunBriteTV 3230HD, Operator'S Manual

Page: 7 / 36

SunBriteTV Model 3230HD Operator’s Manual
Page 7
TV Installation - Table-top Stand Installation
Table Top Stand Installation
Tools Needed: Phillips screwdriver
Notes:
Do not attach the Table-top Stand if you plan to install the TV on a wall
mount or ceiling mount.
For demonstration purposes, this manual is showing how to install the right-
half of the Table Stand. Because you will be working from the back of the TV,
the Table Stand will appear on the left.
1. Prepare a flat work surface, free of any debris or items which may scratch the
front surface of the TV.
2. Lay the TV face-down on the work surface with the bottom of the unit closest
to you
WARNING: Use at least two people when transporting the TV.
3. Position the TV so that the bottom edge overhangs the table by about two
inches.
4. The TV is shipped with two Table-top Stand Mounting Screws on each side
of the TV. There are two Mounting Niches at the bottom of the TV on each side
(Figure 1).
5. Temporarily remove the Table-top Stand Mounting Screws. (Figure 1).
Note: Never permanently remove the Mounting Screws (or any
screws) from the TV.
6. The Table-top Stand has adjacent Mounting Holes, and a set of two Mounting
Catches (Figure 2).
7. Align the Table-top Stand Mounting Holes with the TV Mounting Holes, and
align the Table-top Stand’s Mounting Catch to the TV’s Mounting Niche. Slide
the Catch into the Niche (Figure 3).
8. Replace the Table-top Stand Mounting screws to attach the Table-top Stand
to the TV and secure tightly (Figure 4).
9. Follow procedures 4 thru 8 to install the other Table-top Stand.
Figure 3
Figure 4
WARNING: To prevent personal injury and/or
damage to the TV or personal property, use at
least two people to install or move the TV.
Figure 1
TV’s Table-top Stand
Mounting Screws
TV’s Table-
top Stand
Mounting
Niche
Figure 2
Table-top Stand
Table-top Stand
Mounting
Catches
Table-top Stand
Mounting Holes
Align
Mounting
Holes
Slide Table-top
Stand’s Mounting
Catch into
TV’s Mounting Niche