15 |
P a g e
Water Jets –
Bearlingless Massage Sunblaster Jets (5”, 4”, 3”, 2”)
The jets pictured above can be found on a Sunbelt
Spa. Water comes through the jet when the jet is
turned clockwise or into the on position. Water will
be blocked by turning the jet off by twisting it
counterclockwise. When the jet face needs to be
removed
the
jet
can
be
turned
further
counterclockwise and the jet face will pop out of the jet body. When replacing a jet face look
for the small notch in the groove found on the back of the jet. This notch should be positioned
at the identical recess in the jet body when placing the jet. Turning the jet clockwise into the
body will then correctly place the jet into the spa.
Shut Off Valve/Slice Valve –
The shut off valve is a slice valve that stops water
flow from the pump to the attached pipes. In the
up position the slice valve allows for complete
water flow and spa operation. In the down position
the slice valve closes and the water is stopped from
flowing. These slice valves allow a spa technician to
remove the pump and replace the pump without
having to empty all of the spa water.
Air Pump/Blower–
The blower, air pump, pushes air through the
lines and adds air to the air injectors for the
“Bubble” effects in your spa. The air blower is
operated through the spa pack ( ) button and has
one speed.
