9
Before using your VersaCook for the first
time, remove the aluminium pan and lid and
wash them in warm soapy water.
Place the VersaCook on a flat, level surface.
Plug in the unit. The unit will beep. The
VersaCook will default to the Slow Cook menu
on the LOW setting. The display will show a
line underneath ‘Slow Cook’ on the panel and
the display will show LO.
1. Place your food inside the pan.
2. If the menu is not set to Slow Cook, set
the cooking mode by scrolling through
the MENU button until a line appears in
the display under Slow Cook.
3. To select the time, press the CUSTOM
button and then press the
and
buttons until your desired time appears
in the panel. Each button press will
adjust the time by 30 minutes.
4. To select the temperature/ heat setting of
HIGH or LOW, press the CUSTOM button,
and then Press the
and
buttons,
until HI or LO appears in the panel.
Note:
the minimum cooking time is 30
minutes, and the maximum cooking time is
9 hours.
5. Once you have set the desired TIME and
TEMP (heat) settings, press START. The
cooking light will illuminate red. The
time will immediately display and will
begin to count down.
6. After the set time has elapsed the unit
will automatically switch to the KEEP
WARM mode. The unit will beep and the
panel will display CF (Cooking Finished).
The VersaCook can stay in the Keep
Warm mode for 4 hours.
TIP:
The Slow Cooking mode settings are in
the Mode Settings Table on page 8.
To Cancel a Program
To cancel or change your setting, hold the
CANCEL button. The unit will beep. If the
unit had already started cooking, the Cooking
Light will turn off to indicate the unit is not
cooking.
Slow Cooking Display
Display
Setting
LO
Low
HI
High
CF
Keep Warm
(Cooking Finished)
Using your VersaCook in the
Slow Cook mode