5
Moisture Protection
•
To minimize the possibility of rust, avoid placing the refrigerator in a place with heavy
moisture.
•
Do not directly spray with water; this will cause poor insulation and current leakage may
occur.
Heat Protection
•
The refrigerator should be kept out of direct sunshine and away from any heat sources.
Stable Positioning
•
Place refrigerator on a flat and solid surface.
•
Do not place refrigerator on soft material such as foam, plastic, etc.
•
If the refrigerator is not on a flat surface, adjust the screws appropriately.
•
The refrigerator should not be placed in an area with an echo.
Keep Away From Danger
•
Do not place the refrigerator near any combustibles such as gas, petrol, alcohol, lacquer,
etc.
•
Do not store the above mentioned products in the refrigerator.
Moving the Refrigerator
•
When fixed or moved, the refrigerator cannot be set horizontally or declined to more than
45º or upside-down.
Using Your Refrigerator
Temperature Control
•
The first time you turn on the refrigerator, set the temperature control to “5” or “low”.
•
Let the refrigerator run for 1-2 hours to fully cool before storing food inside.
Notes:
•
If the unit is unplugged or the power is lost or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to reset before waiting, the refrigerator will not
start.
•
To conserve energy, put your refrigerator in the coolest place in your room. If the
environment temperature is too high, the temperature in the refrigerator may not get the
target temperature.
