SONIC EGG™
– Bark Control Divice, Instruction Manual
5
Operating Instructions:
BATTERY
INSTALLATION
The Sunbeam
®
Sonic Egg™ operates using a 9V alkaline battery
(not included). Always use a new battery. Do not use rechargeable
batteries.
1
Remove battery door by pressing
the lever and pulling the door from the
slots
2
Insert battery according to the positive
and negative terminal markings
3
Replace battery door by inserting into
the slots and pressing close
NOTE:
Setting the adjustment dial to the
OFF position when the product is not needed will extend the battery
life.
TESTING
1
Turn the adjustment dial to TEST
2
Hold the unit at an arm’s length away
from you
3
Speak the word “bark” loudly
NOTE:
If the LED flashes
GREEN
and a beep sound is heard then the
product is functioning normally.
If a beep is
NOT
heard then repeat Step 3 with a
louder voice.
If the LED illuminates
RED
then the battery is low.
If the LED still does not flash check that the battery
is installed correctly and the door is securely closed.
Summary of Contents for Sonic Egg
Page 1: ...INSTRUCTION Manual...