Condenser coils
Vacuum cleaner.
Soft brush.
Use the dusting tool attachment on your vacuum
cleaner or a brush to remove dust build up on the
condenser coils (black tubes and wires) attached to the
back.
Compressor base
Soap and water.
Vacuum attachment
Soft brush
Mild liquid spay
Vacuum or brush dust from base and wipe with sudsy
cloth or sponge.
Rinse and dry.
Turn the power off at the wall outlet before replacing the lamp.
Wear gloves as protection against possible broken glass.
Remove all surrounding elements, pans and correspondent covers and shields.
Unscrew and replace the old lamp with a new appliance lamp of the same voltage and power (15 W Max).
Replace the shields and additional elements again.
Plug the refrigerator back into the wall outlet.
( FIG N° 9)
REPLACEMENT OF THE INTERIOR LAMP
PART
WHAT TO USE
TIPS AND PRECAUTIONS
Glass Shelves
Soap and water.
Vacuum attachment
Mild liquid spay
Allow glass to warm to room temperature before
immersing in warm water.
Rinse and dry.
Interior, door liner and its
elements.
Soap and water.
Baking soda and water.
Add 2 tablespoons of baking soda to 1 quart of warm
water.
Wipe the interior surfaces with warm water and soft
soap cleaner or baking soda dissolved in warm water.
To help remove “old stale refrigerator” smell add a few
drops of vanilla extract to the water before cleaning.
Be sure to wring excess water out of the sponge or
cloth when cleaning in the control area, light bulb or
any electrical part.
Wash the shelves in warm water, and soft soap, rinse
in clean water and dry by hand; do not put them into
the dishwasher.
Wipe and dry.
Defrost water pan.
Soap and water.
Two door models have the pan located on top of the
compressor compartment at the bottom rear of refrigerator.
Move
away from
wall and unplug from
the wall outlet.
the refrigerator
the
Be careful with tubing surrounding the pan as it may
be hot.
Wipe water pan with damp cloth or sponge.
( FIG N° 8)
8
