6
Using your Snack Heroes
™
Chocolate Fountain
1. Turn the chocolate fountain to the ‘off’ dial
setting.
2. Plug the unit into a 230-240 volt AC
power outlet and switch the power on.
Note:
Place the chocolate fountain on a flat
level bench.
3. Turn the dial to the ‘warm up’ function to
allow the base to warm up for 5 minutes.
4. Melt chocolate according to directions on
page 7.
5. Pour the melted chocolate mixture into
the base of the fountain and switch the
dial to ‘choc flow’ to start the chocolate
fountain flow. See figure 4.
Note:
To operate the chocolate fountain, the
chocolate must always be in liquid form.
6. Allow the chocolate fountain to flow for at
least 5 minutes before adding extra oil.
Note:
If the mixture is not flowing correctly
see troubleshooting on page 9.
Do not leave chocolate in the fountain
overnight in the ‘warm up’ setting. This
setting is not a high enough temperature to
keep the chocolate from hardening.
Figure 4