6
After each use
1. Turn the power off and remove the plug
from the power outlet.
2. Allow the garment steamer to cool before
storing.
Storage
Empty the water tank before storage.
Cleaning
To clean the exterior of your garment
steamer, wipe over with a damp soft cloth
and wipe dry.
Caution:
Do not use harsh abrasives,
chemical cleaners or solvents to clean the
exterior of your garment steamer as these
will damage the surface.
Cleaning the steam holes from the steam hose
head
To remove build up from the steam holes
which may affect steam performance, use
a cotton wool tip moistened in methylated
spirits
Calc Clean Instructions – using descaling
tablets
Mineral deposits in tap water solidify when
the water is heated and can build up in
the unit of the garment steamer which can
affect steam performance. It is important
to regularly flush out the unit to maintain
the best performance. We recommend calc
cleaning every month. Use Ironing System
descaling tablets. We recommend using
Sunbeam Ironing System Descaling Tablets
(SR0100).
1. Dissolve 1 x 6g tablet in 400ml of warm
water (90 degrees is recommended) in a
jug before use.
2. Turn the unit off and wait for it to cool
completely (approx 2 hours).
CAUTION:
The water in the unit and in the
tank may be hot after use. Ensure to let
the garment steamer cool down.
3. Pour out all remaining water from the
water tank into the sink. Lift the base unit
and pour out any remaining water from
the unit into the sink. You may want to
unscrew the steam hose for ease.
4. Then carefully pour the descaling solution
into the base unit. Leave for 2 minutes.
Gently shake the base unit back and forth
to dislodge any scale build up inside the
unit. Leave for 2 minutes.
5. Then pour out all remaining liquid from
the unit into the sink.
6. Rinse by repeating process with 400ml
of water (90 degrees is recommended),
shake and empty the unit again.
Repeat rinsing process at least 2 times.
Care and Cleaning
