5
Operating your Sunbeam
Pure Juice
Note: As an added safety feature the Pure
Juice will not operate if the safety levers are
not locked in place.
1. Ensure the switch on the Pure Juice is in
the ‘Off’ position and plug the cord into
a 230- 240V power outlet and turn the
power on.
2. Clean fruits and vegetables thoroughly and
remove any stems, large pits, stones and
seeds. All fruits and vegetables should be
cut into pieces to fit into Lid/Feed Tube.
3. Ensure that the Pure Juice has been
assembled correctly, making sure that
the stainless steel grating and filtering
basket revolves properly before placing
the ingredients in the Pure Juice. Refer to
page 4 for assembly instructions.
4. Switch the Pure Juice to the ‘On’ position
to start juicing. Place food into the Lid/
Feed Tube slowly and steadily, using the
Food Pusher.
Note: Do not force the food into the grating
and filtering basket as this can cause basket
to shift and result in plastic shavings getting
into the juice.
5. The Juice from the fruits or vegetables will
flow directly into the glass or jug and the
pulp will be separated and collected in the
Pulp container.
Important: If juicing large amounts of fruits
or vegetables, the pulp container will be
filled, switch Pure Juice to the ‘Off’ position,
unplug cord, and allow grating and filtering
basket to stop completely. Empty Pulp
container and reposition.
6. When juicing is complete ensure that the
Pure Juice is switched ‘Off’ and unplugged
from the power outlet.
Lid/Feed Tube
