background image

Using the shot of steam
The shot of steam can be used whether dry 

or steam ironing when the temperature dial 

is set to any temperature above the two dot 

(••) setting.
1. Ensure the tank is at least ¼ full of 

water.

2. Select the desired temperature and wait 

until the thermostat light goes out.

3. Press the shot of steam button several 

times with the iron on the soleplate to 

prime the pump.

NOTE: If the tank has run dry, it may be  

necessary to re-prime the pump after filling 

the iron with water.
Using the spray mist
The spray mist can be used whether dry  

or steam ironing to pre-dampen hard to  

iron fabrics.
1. Ensure the tank is at least ¼ full of 

water.

2. Press the spray button during ironing 

to release a fine mist from the spray 

nozzle.

Using your Sunbeam Pro Steam

 

Iron

 

 (continued)

7

The safety auto-off mechanism automatically 

turns the iron off if you forget. 
The iron will automatically shut off if left  

on the heel rest (vertical) for 15 minutes,  

or in the ironing position (horizontal) for 30 

seconds, without being moved. 
The thermostat light on the handle will flash 

and a warning beep will sound to let you 

know that you have left the iron unattended.
Power to the iron's heating element will be 

cut.

Once the iron is moved the power will 

reconnect. Allow the iron to heat until the 

thermostat light goes out, and continue 

ironing as normal.

The safety auto-off feature

(Model SR4300 only)

  15 minutes

30 seconds

Summary of Contents for Pro Steam SR4100













Reviews: