Sunbeam PLANETARY MIXMASTER MX9200, Instruction/Recipe Booklet

Page: 11 / 40

9
Count-up timer
The count up timer informs you how long
your ingredients have been mixing for. The
next time you mix the same ingredients you
can then set the count-down timer for the
specific time.
As soon as you start mixing, the timer will
automatically start to count up.
The maximum mixing time is 20 minutes
and will be displayed on the LCD screen as
“20:00” (twenty minutes, zero seconds).
The mixer will automatically stop mixing after
20 minutes and beep twice.
The screen will flash for about 5 seconds.
The timer will automatically re-set to
“00:00”.
The LCD screen will display the speed
setting that it stopped at and this setting will
continue to flash.
If you pause the mixer at any time during the
mixing process by pressing the
button
at the front of the speed control dial, the
mixing time displayed on the LCD screen will
flash until you resume mixing by pressing the
button again.
To reset the timer to
“00:00”, turn the speed
control dial anti-clockwise to the
“0” location
or, when paused, press the
‘+’ and ‘-’ buttons
simultaneously.
Count-down timer
The count-down timer is especially useful
when following a recipe that specifies mixing
times.
The
‘+’ and ‘-’ buttons allow you to choose
the desired mixing duration. Press the
‘+’ button and you will add 30 seconds.
Press the
‘-’ button and you will reduce the
previously set mixing time by 30 seconds.
For example, if a recipe calls to “beat for
2 minutes”, you can set the count-down
timer to 2 minutes. Simply press the
‘+’
button until “02:00” is displayed on the LCD
screen, i.e. press the ‘+’ button four times.
If you would like to change the countdown
time after your initial setup, press the
button, then press the ‘+’ and ‘-’ buttons to
increase or reduce the mixing time to the
nearest 30 sec increment.
For example, you set the count-down timer
to 3 minutes and turn the speed control dial
to start mixing on a chosen speed. After 1
minute, 25 seconds, you pause the mixer by
pressing the
button. The LCD displays
the remaining count-down time of 01:35. If
you now press the
‘+’ button once to increase
the mixing time, the display will show 02:00
(which is the nearest 30 sec increment).
To reset the timer to
“00:00”, turn the speed
control dial anti-clockwise to the “0” location
or, when paused, press the ‘+’ and ‘-’ buttons
simultaneously.
When the chosen mixing time is completed,
the mixer will beep twice to inform you that
the time has expired. It will stop mixing
automatically. The timer display
“00:00”
and the LCD screen will flash for about 5
seconds. The LCD screen will display the
speed setting that it stopped at and this
setting will continue to flash.
Using your Café Series
®
Planetary Mixmaster
®
Bench Mixer
continued