Sunbeam Maestro TA6420, Instruction Booklet

Page: 7 / 12

5
Cancel button
The Cancel button immediately stops any of
the toasting cycles. As a consequence of this,
the toast will pop up. Pressing Cancel also
puts the electronic browning setting back to
default level 2.
High-lift lever
When toasting small pieces of bread,
crumpets or muffins we recommend using
the High-lift lever to prevent you from
burning your fingers.
QuickCheck
The QuickCheck feature enables you to
check on the progress of your toast without
interrupting the toasting cycle. Simply lift up
the toasting lever to view the toast and then
release when you have finished. If the toast
is ready press the Cancel button.
Crumpet Feature
The specialised crumpet setting cooks
crumpets to perfection. When activated,
additional heat is emitted from the centre
elements to cook the top of your crumpet
faster than the bottom. The top of the
crumpet(s) must be facing towards the centre
element. See figure 1.
This feature is activated by pressing the
crumpet button on at any time for example,
before or at the start the toasting cycle.
Defrost Feature
The defrost feature can be used to toast your
frozen bread. The colour of your toast will
brown according to the toasting setting you
have chosen. This feature is activated by
pressing the frozen button on at any time for
example, before or at the start of the toasting
cycle.
Note: When using the Crumpet and Frozen
functions it is still very important to set the
Electronic Browning Control to your desired
setting.
Reheat button
The Reheat button can be selected after the
toasting cycle has finished. Simply select the
reheat button and press the toasting lever
down to start the reheat cycle. If the Reheat
button is selected in the first 30 seconds of
the toasting cycle it will override the toasting
cycle. If the toasting cycle has been running
for over 30 seconds the Reheat button will
cancel the toasting cycle after 5 seconds.
Standby Mode
If the toaster isn't used for over 5 mins it will
go into standby mode. It can be reactivated
by pressing any button.
Toaster Functions
SUNBEAM-XL_ASM_ASM
WEIGHT:
A1
SHEET 1 OF 1 SCALE:1:1
DWG NO.
TITLE:
REVISION DO NOT SCALE DRAWING
MATERIAL:
DATE SIGNATURE NAME
DEBUR AND
BREAK SHARP
EDGES
FINISH: UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
SURFACE FINISH:
TOLERANCES:
LINEAR:
ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
Figure 1
5