background image

4-1

OPERATING INSTRUCTIONS

FEATURES

Oven Front Plate 

Window Door Screen

Door Seal

Power Knob

Door Open Button

Safety Door Lock System

Turntable

Rotating Ring

Timer Knob

min

DEFROST

COOK

The microwave oven is designed to be simple and 
easy to operate. Please follow these instructions 
carefully.

1. Place the food in a suitable cooking utensil. Open

the microwave oven door and place the utensil in 
the center of the oven on the glass tray.

2. Close the oven door.
3. Turn the TIMERKNOB clockwise to set the 

cooking time.

4. When the TIMER reaches OFF, the signal sounds

and the oven will automatically shut off.

5. Open the door and remove the food from the

oven.

6. To stop cooking before the timer reaches OFF,

either open the door or simply turn the timer to
OFF.

NOTE :
1. The oven starts as soon as the KNOB is turned. 

We recommend turning the KNOB past the time
you want and then turn back to the desired setting.

2. The door can be opened during the cooking

process by pushing the Door Open Button. The
timer will stop and the microwave activity will
cease. When the door is closed, cooking will
resume until the full cooking time has elapsed.
After cooking is finished, the Timer will be at OFF.

After unpacking this appliance, examine the new 
oven for evidence of shipping damage. This is most   
important since a damaged oven may allow the 
escape of microwave energy. Make sure you remove 
all packing from the microwave cavity.
Check the oven operation when unpacking the  unit 
and any time the oven is not working properly.

1. Plug the power cord into an earthed electrical    

socket.

2. Place the glass tray inside the oven cavity.
3. Place a cup of water (at room temperature) inside  

the oven, on the glass tray.

4. Close the door securely.
5. Set the Timer for 3 to 4 minutes (note : microwave

activity starts).

6. When the cooking time has elapsed, the signal will

sound (note: all microwave activity stops).

7. If the oven is operating normally, the water will be  

hot. 

OPERATION CHECK

OPERATING PROCEDURE

Summary of Contents for MA-6400B2
































Reviews: