Sunbeam LC7900, Instruction Booklet

Page: 3 / 32

3
SAFETY PRECAUTIONS FOR YOUR SUNBEAM
FOOD PROCESSOR LC7900.
• Always use extreme care when handling blades and
cutting discs. These are extremely sharp and may
cause injury if handled incorrectly. Always store
blades and cutting discs in their respective covers
or processing containers.
• Unplug from power outlet when not in use, before
putting on or taking off attachments, and before
cleaning.
• Do not put hot liquids into the processing bowl.
Cool to room temperature before placing in
processing bowl.
• Avoid contacting moving parts at all times.
• Place the processing bowl onto the base of the
processor before fitting any attachments.
• All blades and attachments should be removed
with care before cleaning.
• Do not over fill the processor.
• Do not process for longer than the time periods
recommended in the operating chart.
• Always remove the blade before emptying the
processing bowl of its contents.
• Take care when removing the bowl from the base,
emptying the bowl or during fitting and removal of
blade system, as blades are extremely sharp.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Sunbeam’s Safety Precautions
Sunbeam is very safety conscious when designing and
manufacturing consumer products, but it is essential
that the product user also exercise care when using
an electrical appliance. Listed below are precautions
which are essential for the safe use of an electrical
appliance:
• Read carefully and save all the instructions provided
with an appliance.
• Always turn the power off at the power outlet before
you insert or remove a plug. Remove by grasping the
plug - do not pull on the cord.
• Turn the power off and remove the plug when the
appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord
unless this cord has been checked and tested by a
qualified technician or service person.
• Always use your appliance from a power outlet of the
voltage (A.C. only) marked on the appliance.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• The temperature of accessible surfaces may be high
when the appliance is operating.
• Never leave an appliance unattended while in use.
• Do not use an appliance for any purpose
other than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang over
the edge of a table or bench top or touch any hot
surface.
• Do not operate any electrical appliance with a
damaged cord or after the appliance has been
damaged in any manner. If damage is suspected,
return the appliance to the nearest Sunbeam
Appointed Service Centre for examination, repair
or adjustment.
• For additional protection, Sunbeam recommend the
use of a residual current device (RCD) with a tripping
current not exceeding 30mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water or any other
liquid unless recommended.
• Appliances are not intended to be operated
by means of an external timer or separate remote
control system.
• This appliance is intended to be used in household
and similar applications such as: staff kitchen areas
in shops, offices and other working environments;
farm houses; by clients in hotels, motels and other
residential type environments; bed and breakfast
type environments.