•
MOTOR DRIVE
Top mounted. Engages
stem of DASHER and
locks to bucket.
•
COVER
Tab in COVER fits
notch in ice cream can.
•
DASHER
Stem on top fits
through hole in center
of COVER, and engages
MOTOR DRIVE.
•
ICE CREAM CAN
Container holds ice
cream mixture.
•
DRAIN HOLE
Allows salt water to flow freely out of BUCKET.
•
WOODEN BUCKET
MOTOR DRIVE tabs secure BUCKET. DRAIN HOLE
located near top of BUCKET. Holds rock salt and ice.
Dasher
4
5
Chill (in the refrigerator) ice cream mixture and ICE
CREAM CAN prior to making the ice cream.
2. While ice cream mixture and CAN are chilling, place
cleaned wood bucket on a flat surface counter top.
Place DASHER and COVER nearby.
3. Once mixture and CAN are chilled, remove from
refrigerator to start the ice cream making process.
4. Pour chilled ice cream mixture into chilled ICE
CREAM CAN. Do not fill above the max level
marked on the inside of the CAN.
5. Insert DASHER into ICE CREAM CAN. Then place
COVER on ICE CREAM CAN by lining up the stem
on the DASHER with the hole on the COVER.
6. Carefully insert the ICE CREAM CAN with COVER
into the center of the BUCKET. Make sure ICE CREAM
CAN engages with the bottom of the BUCKET.
7. Carefully slide the rectangular tab (located on
opposite end of power switch) into the square
bracket slot on BUCKET, align the MOTOR DRIVE
over ICE CREAM CAN so that the stem of the
DASHER engages hole in the bottom of the
MOTOR DRIVE. Rotate ICE CREAM CAN slightly
until MOTOR DRIVE engages ICE CREAM CAN
COVER. Lock in MOTOR DRIVE into BUCKET
with latching handle.
8. Plug Power cord into outlet.
9. Switch power to On and make sure the ICE CREAM
CAN starts to rotate. While ICE CREAM CAN is
rotating, begin to distribute approximately 2 inches
of ice cubes around the inside bottom of the
BUCKET. Sprinkle approximately
1
/
4
cup of rock salt
uniformly over the layer of ice. (NOTE: The
DASHER does not move, the ICE CREAM CAN
rotates around the DASHER.)
NOTE:
Before using for the first time, wash all parts
except MOTOR DRIVE (see “HOW TO CLEAN
YOUR ICE CREAM MAKER”).
1. Mix your favorite ice cream recipe thoroughly in a
bowl PRIOR to putting it in the DASHER. TIP:
Motor Drive
Power Switch
Cover
Ice Cream Can
Bucket Slot
Wooden
Bucket
Drain Hole
Latching
Handle
K
now
Y
our
I
ce
cream
maKer
H
ow
T
o
u
se
Y
our
I
ce
c
ream
m
aKer
BEFORE USE.
FILL BUCKET
2
/
3
FULL OF WATER. LET
SOAK FOR 90 MINUTES.THIS WILL ALLOW THE
WOOD TO SWELL TO ENSURE THE BUCKET
DOES NOT LEAK.
FRSBWDBK 4 QT_11EM3.indd 5-6
8/31/11 9:08 AM
