4
DuPont Teflon
®
Platinum Pro
™
Professional Use
Your Sunbeam Flip & Grill
™
features a special
scratch and abrasive-resistant non-stick
cooking coating that makes it safe to use
metal utensils when cooking. Teflon
®
Platinum Pro
™
– is DuPont’s toughest
non-stick coating to date – up to 10 times
more scratch resistant than single layer
non-stick coatings.*
DuPont is the world leader in non-stick
coatings and today more than 2 billion
households have Teflon
®
non-stick coated
cookware.
Teflon
®
Platinum Pro
™
is a premium 3 layer
non-stick coating. It features special scratch
resistant minerals causing metal utensils to
slide over these particles without damaging
the Teflon
®
matrix. This preserves the release
properties of the non-stick coating and the
life of the Flip & Grill
™
.
The result is a non-stick coating that can be
treated like ordinary cookware, enabling the
use of metal utensils. However, Sunbeam
recommends that care is taken with the
non-stick coating when using metal utensils.
Do not use sharp objects or cut food on the
Flip & Grill
™
. Damage caused to your Flip &
Grill
™
as a result of misuse of metal utensils
will void your warranty.
* The images shown here and performance
claims are based upon the DuPont
In-house Cooking Abuse Test used to
evaluate scratch resistance and release
properties of non-stick coatings.
Superior
nonstick top surface
scratch
resistant minerals
Reinforced intermediate coat
Grill base
Teflon
®
Platinum Pro
™
– 3 layer scratch
resistant coating
Results from DuPont’s ‘In-house Cooking
Abuse Test’
SUNBEAM OTHER BRANDS
Before using your Flip & Grill
™
Before using your Flip & Grill
™
for the first
time, remove all packaging and promotional
materials from the cooking plate, drip tray,
base and control probe.
With the control probe detached, wash
the cooking plate, drip tray and base with
warm soapy water using a mild household
detergent.
Rinse and dry thoroughly. Make sure the
interior of the probe inlet is fully dry.
Condition the cooking plates to protect the
non-stick surface by applying a light coating
of vegetable oil or use a non-stick cooking
spray. Wipe off excess oil.
For easy cleaning line the drip tray with
aluminium foil to collect the fats and juices.
Place drip tray into base.
Ensure the drip tray and grill plate are
correctly positioned over the base to
deactivate the safety locking mechanism.
Note:
When using the Flip & Grill
™
for the
first time you may notice a fine smoke haze
being emitted from the unit. This is normal.
It is due to the initial heating of internal
components.
Using your Flip & Grill
™
1. Place on a flat, level, heat-resistant
surface.
2. Insert the control probe fully into the
probe inlet of the grill plate.
3. Plug the cord into a 230-240 volt AC
power outlet and turn the power ON.
4. Set the control probe dial to the desired
heat setting.
5. Preheat until the thermostat light switches
off, indicating the Flip & Grill
™
is ready to
use.
Note:
The thermostat light on the control
probe indicates the Flip & Grill
™
is heating.
This light will remain on until the set
temperature has been reached and then will
cycle on and off during cooking to ensure
the selected temperature is maintained. The
preheat time will depend on the heat setting
selected.
Note:
When grilling on high heat settings, the
Flip & Grill
™
will generate smoke. Selecting
a lower heat setting will reduce smoke.
For indoor use, adequate ventilation or an
exhaust fan is recommended.
6. After you have completed grilling turn the
power OFF and unplug from the power
outlet.
Note:
Ensure the cord is kept well away from
the cooking plates when in use.
Caution:
Do not touch the grill plate when in
use. Avoid touching hot surfaces. Take care
when removing food from the grill. Do not
transport the grill when it is hot.
Using your Flip & Grill
™
5