background image

Sunbeam’s Safety Precautions

Sunbeam are very safety conscious when 

designing and manufacturing consumer prod-

ucts, but it is essential that the product user 

also exercise care when using an electrical 

appliance. Listed below are precautions which 

are essential for the safe use of an electrical 

appliance:

Read carefully and save all the instructions 
provided with an appliance.
Always turn the power off at the power outlet 
before you insert or remove a plug. Remove by 
grasping the plug - do not pull on the cord.
Turn the power off and remove the plug when 
the appliance is not in use and before cleaning.
Do not use your appliance with an extension 
cord unless this cord has been checked and 
tested by a quali

fi

 ed technician or service 

person.
Always use your appliance from a power 
outlet of the voltage (A.C. only) marked on the 
appliance.
Close supervision is necessary when your 
appliance is being used near children or in

fi

 rm 

persons.
Never leave an appliance unattended while in 
use.
Young children should be supervised to ensure 
that they do not play with the appliance.

Do not use an appliance for any purpose other 
than its intended use.
Do not place an appliance on or near a hot gas 

fl

 ame, electric element or on a heated oven. Do 

not place on top of any other appliance.
Do not let the power cord of an appliance hang 
over the edge of a table or bench top or touch 
any hot surface.
For safety reasons and to avoid maintenance 
by unskilled persons, some appliances are 
‘sealed’ using tamperproof screws. Such 
appliances should always be returned to the 
nearest Sunbeam Appointed Service Centre for 
adjustment or repair if required.
Do not operate any electrical appliance with a 
damaged cord or after the appliance has been 
dropped or damaged in any manner. If damage 
is suspected, return the appliance to the 
nearest Sunbeam Appointed Service Centre for 
examination, repair or adjustment.
For additional protection, Sunbeam recommend 
the use of a residual current device (RCD) 
with a tripping current not exceeding 30mA in 
the electrical circuit supplying power to your 
appliances.
Do not immerse the appliance in water or any 
other liquid.

If you have any concerns regarding the performance and use of your appliance, 
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.

1

sun_7200.indd   Sec1:1

8/07/2008   18:24:57

Summary of Contents for FA7200

















Reviews: