background image

FINAL ART     5/5/05

& Associates, Inc.

Job # 0023671     Size:10.75" x 8.25" (PAGE 5.375" x 8.25")     Art Built @ 100% PAGE SIZE     Colors: B/W

IMPORTANT INSTRUCTIONS

DO NOT DESTROY

Warnings and Safeguards

As with all electrical products, misuse of product or failure to properly follow the
instructions may cause overheating, fire or personal injury. Please read the product
label and all of the instructions before using your warming product.
1.  Do not use this warming product with an infant, a child, an incapacitated 

person, a paraplegic, a quadriplegic, a diabetic, one insensitive to heat such as
a person with poor blood circulation, or anyone who cannot clearly understand
the instructions and/or operate the controls.

2.  Do not use with damaged cords. Damaged cords can lead to fire. Do not trap,

fold, cross or pinch cords between bed slats, mattress or springs, or against
walls, footboards or bed frame.

3.  Do not dry clean this warming product. Cleaning liquid may damage the 

insulation of the heating element. Improper laundering may cause problems
with the heating wire which can lead to fire.

4.  Do not pinch, flex or expose the heating wire to rubbing. A damaged heating

wire may result in possible overheating or fire.

5.  Turn off the control for the warming product when not using.
6.  Keep control away from an open window.
7.  Do not use pins; they may damage the electric wiring.
8.  Be sure this blanket/mattress pad/throw is used only on an AC supply current

circuit of 110-120 volts. Do not use with an extension cord.

9. May experience increased heat in areas where warming product is bunched or

folded while in use.

10. Keep all dogs, cats and other pets away from this warming product. This is 

an electrical appliance that they can damage or be injured by.

11. Do not use blanket/mattress pad on a waterbed, sofa, bunk bed or 

mechanically adjustable bed and do not use throw on a waterbed, bunk bed 
or mechanically adjustable bed.

12. Do not use another electronic heating device in conjunction with your warming

product.

13. Use the proper size blanket/mattress pad for your bed. For example, use a Twin

Size warming blanket on a Twin Size bed.

14. If the following Important Instructions are not followed, the warming product

will not operate properly.

15. Not for hotel, motel or other institutional use.
16. If you see the warming product operating improperly, unplug it immediately

and call Sunbeam Consumer Care at 800-892-7684.

Summary of Contents for Electric Heater













Reviews: