6
We recommend washing before initial use.
Before Washing or Storing Your Heated Product:
1
Disconnect power cord from wall BEFORE detaching control cord from the heated product.
2
Ensure that no cords are still connected and none of the wires have worn through the fabric.
3
Carefully follow all washing instructions or your heated product may shrink and possibly cause a fire hazard.
• DO NOT
submerge control in water.
•
DO NOT
dry clean your heated product. Dry cleaning solvents may damage the wires.
•
DO NOT
use bleach or cleaning fluids.
•
DO NOT
use a wringer.
•
DO NOT
iron your heated product.
•
DO NOT
use mothballs or sprays of any kind.
•
DO NOT
reconnect the heated product or use it until it is COMPLETELY dry.
•
DO NOT
wash or put into water the power cord or any of the product’s cords.
•
DO NOT
use analgesic cream in combination with your heated product.
Taking care of your heated product is easy and safe as long as you follow a few simple steps.
Machine Washing
1
Presoak the blanket/mattress pad/throw for 15 minutes in mild soap and cold water.
2
Wash in mild soap and cold water on the “delicate” or “gentle” cycle in the washer for two minutes.
Remember, do not use bleach.
3
Rinse in fresh, cold water.
4
Spin dry in the washing machine. Then gently stretch to its original size.
Machine Drying
Caution:
Do not use commercial dryers or the dryers at your local laundromat. They get too hot and would
damage the wiring of the heated product.
1
Preheat the dryer on the “low” temperature setting for 2 minutes.
2
Place blanket/mattress pad/throw into the dryer and tumble dry for 10 minutes at a low temperature.
3
Remove the blanket/mattress pad/throw while it is still damp and gently stretch it to its original size.
4
Drape the heated product over a clothesline or a shower rod. DO NOT use clothespins.
5
Heated product must be COMPLETELY dry before reconnecting the power plug or control plug.
Hand Drying
1
Gently stretch the blanket/mattress pad/throw back to its original size.
2
Drape the heated product over a clothesline or hang over a shower rod. DO NOT use clothespins.
3
Heated product must be COMPLETELY dry before reconnecting the power plug or control plug.
Care and Cleaning
OF YOUR HEATED PRODUCT
For questions or support, please visit:
www.sunbeam.com