![background image](http://html1.mh-extra.com/html/sunbeam/20060328/20060328_service-manual_1394664031.webp)
Figure C6
14. Before mounting the new evaporator put the thermostat and defrosting resistances in it.
15. Mount the new evaporator and fold tubing carefully to avoid strangling.
16. Mount the capillary tube and the suction tube in the evaporator extremes and weld (use ceramic protectors to prevent
burning of isolation and plastic parts).
17. Cover with glass wool (fiber glass) the spaces where the foam isolation was removed.
18. Apply silicon in the whole foam isolation surface.
19. Put a new manufacture real panel and adjust until it touches isolation completely.
20. Put condenser in position and screw again.
21. Place the refrigerator vertically; replace the dehydrator filter as shown in this manual.
22. Make evacuation and load procedures shown in this manual.
23. Re -assemble the freezer frontal part.
Change of evaporator plate
Follow this procedure to replace the fins evaporator in the points associated with rear panel removing.
To fold plate tubing follows the same care instruction recommended in the previous procedure and fold them as per
figure C7
Figure C7
PAGE. C8
CYCLIC REFRIGERATOR
FROST FREE
REFRIGERATOR
R= 21.0 (0.825")
R= 21.0 (0.825")
R= 15.0 (0.600")
R= 21.0 (0.825")
R21.0 (0.825")
R32 (1.25")
190.0 (7.48")
130.0 (5.12")
R21.0 (0.825")
32.0 (1.25")
TANK
EVAPORATOR