Setup and Operation
1
3
5
2
4
1-877-387-3639 | Page 3
Step 1: Insert the plug into the socket under the solar
panel.
Step 3: Insert the bottom pole into the upper pole while
pressing the snap button on the bottom pole until the
snap button locks into position.
Step 5: Put the solar umbrella in direct sunlight to
charge the batteries for 8 hours before the first use.
Step 2: Put the solar panel on the top of umbrella and
hide the plug and wire inside the groove at the top of
umbrella. Then turn the solar panel clockwise. Do not
over tighten.
Step 4: We recommend that you stand and secure the
umbrella base (not included). Secure the umbrella pole
firmly by tightening the locking nut.
CAUTION:
Do not use sharp tools or equipment such as a knife or
scissors when removing the protective material, as it may
damage the product.
WARNING:
Read the entire instructions before beginning and follow
the steps outlined. Failure to assemble and install as
instructed could result in the umbrella tipping over
causing personal injury and/or property damage.
INFORMATION:
Please remove the plastic film on the solar panel. This
protective film is to prevent damage during shipping.
Failure to remove the film will result in the solar panel not
functioning properly.
