background image

A decoder can be a DVR or a video capture card. Some TV (with built-in 

decoder) also supports CVBS signal. 

FCC Warning (U.S.A) 

The device has been tested in compliance with limits set by Part 15 of 

Federal Communication Commission (Class B). The operation of the 

device is thus limited by the following two conditions: 

1) it is not permitted to cause harmful interference to any authorized 

radio communications, and 2) it must accept any interference it receives. 

WARNING:

  Please test the camera locally by directly 

connecting to the default power adapter from the package 

before mounting it outside. Stay at least 24 hours to test both 

daytime and night vision IR LED. 

1.Camera Compatibility

Sunba Analog Cameras: 960H

 

CVBS 

Signal  

Model: 305-A4X, 301-3X, 405-22X, 405-36X 

Analog cameras require a decoder to display images on a monitor. 

Sunba Analog PTZ camera requires Pelco D protocol and RS485 

standard to support PTZ. 

- 01 -

Common Decoding Equipment

Type A: 960H Digital Video Recorder (DVR) 

Type B: CCTV Monitor with Built-in CVBS decoder  

This enables your camera to properly display videos. 

CCTV Monitor

Summary of Contents for 301-3X


















Reviews: