tablet can control Sun Hoist
until the assigned phone or
tablet is either out of range,
that particular Station location
is deselected, or the smart
phone or tablet placed on
standby or powered off.
CONTROL
Select the
Control icon
h
or swipe screen
to the right to
go to the control
screen. The Sun
Hoist has two
motors, Left
i
and Right
j
.
Each motor can
be controlled
independently,
or both motors
at one time
k
.
Use Up arrow
l
or Down arrow
m
for desired
direction. Press-
ing Auto Level
n
with perform
an automated
leveling function at the end of
a move when both motors are
selected. All paired devices
move simultaneously.
Note:
A slight pause may take
place during operation due to
the large amount of data being
transferred by bluetooth. This is
normal and only momentary.
INFORMATION
Not in use on Sun Hoist.
REMOTE OPERATION
Simply open the MySmartLift
application on your smart
phone or tablet. Toggle to
connect page and select the
desired Lift Station. Next
toggle to the Control page and
continually press the UP or
DOWN arrows for the desired
direction of travel. Pressing
auto level will perform an
automated function to level the
light fixture at the end of either
an up move or down move
when both motors are selected.
Sensor should level to within
0.5 degrees. Manual level can
be done by selecting the Left
or the Right motor individually,
and arrow Up or Down to move
to desired location.
Warnings
• Properly and securely install
the mounting rail to withstand
forces up to the 60 lb. max
rating.
• Plug power adapter into a
properly grounded 120 VAC
circuit only.
DO NOT USE
if
power or control cable is cut
or frayed.
• Inspect the Sun Hoist upon
installation to verify proper
lift cord alignment.
• The level sensor is a precision
instrument. The level senor
housing is magnetically
mounting to the steel light
housing and MUST be placed
parallel to the front edge
of the light with the cord
connector on the left hand
side. If installed on the right
side, or if installed at an angle,
the auto level function will
not properly perform.
• Never lift more than 60 lbs.
• Do not stand under Sun Hoist
when lifting.
TROUBLESHOOTING
• If the auto level function
results in an angle greater
than 20 degrees of inclination,
rotate the magnetic level
sensor 180 degrees on the
top of the light. Verify that
the cord is exiting the left side
when the logo on the sensor
is facing you. The sensor
must be placed parallel to
the front edge of the light
with the cord connector on
the left side, not at an angle,
which will adversely affect
the leveling accuracy.
• If you are unable to pair, be
sure another phone is not
already paired and within the
30 foot Bluetooth range.
Warranty Information
SUNLIGHT SUPPLY INC
warrants this product to be
free from defects in materials
and/or workmanship for one
year from date of purchase.
Proof of purchase is required to
obtain warranty coverage. This
warranty does not cover normal
wear and tear, unreasonable
or excessive use, improper
installation, damage and/or
any alterations of this product.
See additional info on long
form warranty.
CONNECT
SELECT
DEVICE
LIFT 1
LIFT 2
LIFT 3
LIFT 4
LIFT 5
LIFT 6
ASSIGN
LIFT 7
LIFT 8
h
CONTROL
LEFT
BOTH
RIGHT
AUTO LEVEL
i
j
k
l
m
n
4.00 in
MOUNTING RAIL TEMPLATE
CONNECT
SELECT
DEVICE
LIFT 1
LIFT 2
LIFT 3
LIFT 4
LIFT 5
LIFT 6
ASSIGN
LIFT 7
LIFT 8
CONTROL
LEFT
BOTH
RIGHT
INFORMATION
TEMPERATURE
HUMIDITY
CARBON DIOXIDE
AUTO LEVEL
C°
28
78
12
%
%RH
MAIN 3 PAGES
