Install Sauna Roof
Lower the Roof into place by first fitting the Door
side of Roof on the sauna Walls
Keep the opposite side of Roof elevated to enable
connection of the 12 V power supply line.
Ensure that 12V DC power line from the Roof
(with white plastic connector) is accessible before
installing the Roof.
If you are unable to grab hold of the 12V power line from inside the
roof it may be necessary to remove the first T&G board on the Roof
(access panel) and feed the wire down through the hole in the roof.
Australia - 1800 316 962 | New Zealand 0800 21 8020
