Sun Oracle Storage Tek T10000, Reference Manual

Page: 32 / 296

Cables and Connectors
14 T10000: Interface Reference Manual • January 2011 • E20425-01
Interface Ports
The T10000 tape drive can support either short or long wavelength interface
ports. The tape drive is designed to accept the small form-factor pluggable
(SFP) transceivers in to the interface ports. It is acceptable to use one port as
short wave and one port as long wave (mixed).
Table 8 and Figure 7 list the cable and connector specifications.
Figure 7 provides a description of the FC-0 codes.
Table 8. Cable Specifications
Data Rate Distance
(maximum)
FC-0 Code Cable Type Connector
Meters Feet
1.062 Gb/s 500 1,640 100-M5-SN-I Multimode 850 nm Short wave Duplex LC
2.125 Gb/s 300 984 200-M5-SN-I Multimode 850 nm Short wave Duplex LC
4.250 Gb/s 150 492 400-M5-SN-I Multimode 850 nm Short wave Duplex LC
1.062 Gb/s 10,000 32,808 100-SM-LC-L Single mode 1300 nm Long wave Duplex LC
2.125 Gb/s 10,000 32,808 200-SM-LC-L Single mode 1300 nm Long wave Duplex LC
4.250 Gb/s 10,000 32,808 400-SM-LC-L Single mode 1300 nm Long wave Duplex LC
Figure 7. Cable Marking Descriptions
C53566
100-SM-LL-L
Distance
L long
I intermediate
S short
Speed
400 400 MBps “Quadruple-speed”
200 200 MBps “Double-speed”
100 100 MBps “Full-speed”
50 50 MBps “Half-speed”
25 25 MBps “Quarter-speed”
12 12 MBps “Eighth-speed”
Media
SM single-mode fiber
M5 multi-mode (50 µm)
M6 multi-mode (62.5 µm)
TV video cable
MI miniature coax cable
TP twisted pair
Transmitter
LL long wave laser (1,300 nm)
SL short wave laser with OFC (780 nm)
SN
LE long wave LED
EL electrical
short wave laser without OFC (780 nm)
Distance
L long

I intermediate

S short

V very long