Sun Oracle Storage Tek T10000, Reference Manual

Page: 19 / 296

E20425-01 • 1
1
General Information
This chapter contains an overview about the Fibre Channel specifications for
Oracle’s StorageTek T10000 Tape Drive, which conforms to the:
• American National Standards Institute (ANSI),
• National Committee for Information Technology Standards (NCITS)
• Table 1 lists the documents that help define this implementation.
Table 1. Fibre Channel Reference Documentation
Specification Revision
Fibre Channel Physical and Signaling Interface FC-PH X3.230: 1994
Fibre Channel Physical and Signaling Interface 2
nd
Generation FC-PH-2 X3.297: 1997
Fibre Channel Physical and Signaling Interface 3
rd
Generation FC-PH-3 X3.303:1998
2FC* Fibre Channel Arbitrated Loop FC-AL X3.272-1996 Rev. 4.5
2FC* Fibre Channel Arbitrated Loop 2 (August 28, 1998) FC-AL-2 Working Draft Rev. 6.4
4FC* Fibre Channel Physical Interface FC-PI T11/Project 1306-0, Rev. 2
4FC* Fibre Channel Framing and Signaling Interface FC-FS T11/Project 1331-0, Rev. 1.2
Fibre Channel Fabric Loop Attachment Technical Report FC-FLA NCITS/TR-20: 1998
Fibre Channel Private Loop Direct Attach Technical Report FC-PLDA NCITS/TR-19: 1998
Fibre Channel Generic Services Definition 2
nd
Generation FC-GS-2 NCITS 288.200x, Rev. 5.3
Fibre Channel Generic Services Definition 3
rd
Generation FC-GS-3 Working Draft Rev. 6.2
Fibre Channel Tape Profile Technical Report (May 14, 1999) FS-Tape T11/99-069v4, Rev. 1.17
SCSI Fibre Channel Protocol SCSI FCP X3.269:1996, Rev. 12
SCSI Fibre Channel Protocol 2 ANSI NCITS:350:2003
SCSI Fibre Channel Protocol 3
ANSI INCITS:416:2006
SCSI–3 Architecture Model (SAM-2) ANSI NCITS:366:2003
SCSI-3 Architecture Model (SAM-3)
ANSI INCITS:402:2005
SCSI–3 Primary Commands (SPC–2) ANSI NCITS:351:2001
SCSI-3 Primary Commands (SPC-3)
ANSI NCITS:408:2005
SCSI–3 Stream Commands (SSC) ANSI NCITS:335:2000
SCSI-3 Stream Commands (SSC-3)
T10/1611-D Revision 04a
* Indicates specific reference for that implementation of the Fibre Channel interface.