Sun Oracle SPARC T4-1B, Installation Manual

Page: 29 / 58

Installing the Server Module 23
▼
Install Optional Components
Optional components that you order as part of the server module’s initial
configuration are installed in the server module before it is shipped. These optional
components are identified on the customer information sheet included with the
server module’s packaging.
However, if you ordered optional components separately, you must install them in
the server module before you install the server module in the modular system
chassis.
1. Install any optional components in the server module.
To install any optional components, refer to the SPARC T4-1B Server Module Service
Manual and to the documentation for the optional component.
2. Close the server module.
3. Insert the server module into the chassis.
See “Insert the Server Module Into the Chassis” on page 23 .
Related Information
■
“Prepare the Modular System and Server Module” on page 21
■
“Install Optional Components” on page 23
▼
Insert the Server Module Into the
Chassis
1. (If necessary) Prepare the modular system and server module.
See “Prepare the Modular System and Server Module” on page 21 .
2. (If necessary) Install any optional components.
See “Install Optional Components” on page 23 .
3. Remove the protective cover from the rear connector of the server module.