Sun Oracle Netra SPARC T3-1B, Service Manual

Page: 39 / 136

Detecting and Managing Faults 27
If the PSH facility detects a faulty component, use the
fmadm faulty
command to
display information about the fault. Alternatively, you can use the Oracle ILOM
command
show faulty
for the same purpose.
Related Information
■
“Check for Faults (show faulty Command)” on page 18
■
“PSH-Detected Fault Example” on page 27
■
“Check for PSH-Detected Faults” on page 28
■
“Clear PSH-Detected Faults” on page 30
PSH-Detected Fault Example
When a PSH fault is detected, an Oracle Solaris console message similar to the
following example is displayed.
Note – The Service Action Required LED is also turned on for PSH-diagnosed faults.
Related Information
■
“Oracle Solaris PSH Technology Overview” on page 26
■
“Check for PSH-Detected Faults” on page 28
■
“Clear PSH-Detected Faults” on page 30
SUNW-MSG-ID: SUN4V-8000-DX, TYPE: Fault, VER: 1, SEVERITY: Minor
EVENT-TIME: Wed Jun 17 10:09:46 EDT 2009
PLATFORM: SUNW,system_name, CSN: -, HOSTNAME: server48-37
SOURCE: cpumem-diagnosis, REV: 1.5
EVENT-ID: f92e9fbe-735e-c218-cf87-9e1720a28004
DESC: The number of errors associated with this memory module has
exceeded acceptable levels. Refer to
http://sun.com/msg/SUN4V-8000-DX for more information.
AUTO-RESPONSE: Pages of memory associated with this memory module
are being removed from service as errors are reported.
IMPACT: Total system memory capacity will be reduced
as pages are retired.
REC-ACTION: Schedule a repair procedure to replace the affected
memory module. Use fmdump -v -u <EVENT_ID> to identify the module.