28
Using Software to Retrieve Data
1
After launching the software, turn on the radon monitor by pressing the
ON
key (5).
2
If prompted, enter the PIN and press 5.
3
When the display shows “Start Test = 5”, click the
Retrieve Data from
Monitor
button at the bottom of the Inspection tab on the main screen. The
connection is maintained until software is closed.
USB Cable Connection/Disconnection
If the USB cable is connected after software is already launched, the computer
will detect the port and display a message (Figure 16). Click
Yes
to connect. A
similar message appears if the cable is disconnected while software is running.
Figure 16. Port Detection Message
Closing Software
To close the radon monitor software, click the
Close
button in the Inspection tab
or select
File > Exit
from the menu.
