Sun Microsystems Ultra Enterprise Caster Base, Installation Manual

Page: 17 / 26

Assembling the Caster Base 7
7. Remove the four cover plugs from the top of the first chassis to be stacked
by pressing down on each plug as shown in Figure 4.
Figure 4 Removing Chassis Cover Plugs
Warning – Use caution when placing the chassis to avoid trapping your fingers
between the chassis bottom and the lock module.
8. Ensure that the rear of the chassis is facing the rear of the caster base as
shown in Figure 5, and then carefully place the first chassis onto the
locking module.
The chassis feet should be securely seated in the locking module foot
recesses.
!