Sun Microsystems Ultra 5, Service Manual

Page: 181 / 258

Appendix A Product Specifications and Reference Information A-5
A.4 Environmental Requirements
The following table lists environmental requirements for the Ultra 5 system.
A.5 Reference Information
This section contains the following reference information:
■
Section A.5.1 “CD-ROM Drive Cabling Configuration” on page A-5
■
Section A.5.2 “Hard Drive Cabling Configuration (One Drive)” on page A-6
■
Section A.5.3 “Hard Drive Cabling Configuration (with Optional Secondary
Drive)” on page A-6
■
Section A.5.5 “Jumper Settings” on page A-7
■
Section A.5.6 “CD Handling and Use” on page A-8
A.5.1 CD-ROM Drive Cabling Configuration
The following block diagram shows the cabling for the CD-ROM drive.
■
CD-ROM data cable: connects to motherboard connector J14
■
CD-ROM audio cable: connects to motherboard connector J9
TABLE A-3
Ultra 5 System Environmental Requirements
Environmental Operating Non-operating
Temperature 40 to 95 degrees F
(5 to 35 degrees C) -4 to 140 degrees F
(-20 to 60 degrees C)
Humidity 80% (max) noncondensing
at 95 degrees F (35 degrees C) 95% noncondensing
at 140 degrees F (60 degrees C)
Altitude 10,000 ft (3 km) 40,000 ft (12 km)