3-8
SunSwift SBus Adapter Installation and User’s Guide—January 1996
3
3.5.3 Booting From the Network Using Solaris 2.4
The device name of newer SBus cards for Solaris 2.5 is identified by a
“SUNW,” prefix. If your system is running Solaris 2.4, it will not recognize the
device. Perform the following tasks to set up your system so the device driver
can recognize the SunSwift SBus Adapter.
1. At the
ok
prompt type:
The
show-devs
command lists the system devices. You should see the full
path name of the
hme
device, similar to the example below:
2. Type:
3. Type the following exactly as shown, spaces and quotation marks
included, pressing the Return key at the end of lines
0
,
1
and
2
:
4. Press the Control-C keys after typing
device-end
.
5. At the
ok
prompt, type:
Your system will reset and the banner will appear.
ok setenv use-nvramrc? true
ok show-devs
/iommu@f,e0000000/sbus@f,e0001000/SUNW,hme@3,8c00000
ok nvedit
0: probe-all install-console banner
1: cd
(full path name of the hme device)
2: “ hme” nameprop
3: device-end
ok nvstore
ok reset
Summary of Contents for SunSwift SBus
