Sun Microsystems Sun Ultra 450, Manual

Page: 27 / 45

2. Select a disk slice for your UFS file system and create a new file system on the
slice:
# newfs /dev/rdsk/c
w
t
x
d
y
s
z
For example:
newfs /dev/rdsk/c0t3d0s2
Refer to the
newfs(1M)
man page for more information.
3. If necessary, create a mount point for the new file system:
# mkdir
mount_point
where mount_point is a fully qualified path name. Refer to the
mount(1M)
man
page for more information.
4. After the file system and mount point have been created, modify the
/etc/vfstab
file to reflect the new file system.
See the
vfstab(4)
man page for more details.
5. Mount the new file system using the
mount
command:
# mount
mount_point
where mount_point is the directory you created.
The file system is ready to be used.
Adding a Disk to a Solstice DiskSuite Disk Set
You can use any disk you add to the system for Solstice DiskSuite (SDS) new or
existing metadevices.
Refer to the Solstice DiskSuite documentation for information on configuring the disk
drive.
Replacing a Faulty Hot-Pluggable
Disk Drive
This section contains information on configuring your system to replace a disk drive
while the power is on and the operating system is running.
Disk Drive Hot-Plug Procedures
19