Sun Microsystems Sun StorEdge T3, Installation, Operation And Service Manual

Page: 41 / 148

Chapter 2 Installation 2-3
2.2 Inspecting the Disk Tray
Caution – This procedure requires two people to lift and move the disk tray. Use
care to avoid injury. A disk tray can weigh up to 67 pounds (30 kg).
1. Unpack the disk tray.
You should have the following items:
■
Sun StorEdge T3 disk tray
■
One media interface adapter (MIA)
■
One 5m fiber-optic cable
■
Two power cords
The MIA and cables are illustrated in Appendix B and in Section 2.5 “Connecting the
Cables” on page 2-17.
2. Inspect the disk tray for evidence of damage.
If the disk tray is damaged, keep all contents and packing materials for the shipping
company’s agent to inspect.
3. Save the packing materials for future use.
4. Remove the front panel of the disk tray by pressing in on the side latches and
pulling the cover off (
FIGURE 2-1
).